Ezviz T3C Smart Home Smart Button with Small And Light Design

A3 Gateway is required and sold separately

SPECIAL NOTE:

1 The gateway is not included in the purchase of the smart button.

2 The T3C Smart Button only works with the EZVIZ Sensor Kit and must be connected to the A3 Home Gateway. Currently the button is only compatible with the T1C PIR Sensor and T2C Open/Close Sensor. Other compatible sensors will be launched in the near future.

3 The button can only be used at home with your EZVIZ Home Gateway to ensure steady connectivity. Once it’s disconnected from the Gateway, it will no longer work as an operating controller.

4 Data from EZVIZ lab test results, based on the usage of 15 clicks per day. May vary due to environmental factors.

#Expert control with a simple click

In addition to apps or voice controls, you can now use this simple smart button to switch on and off your entire EZVIZ sensor system² , or press it to send an emergency alarm. It’s mini-sized and battery-powered to go anywhere within your reach.

#Protect your loved ones with one easy click

Use this indoor button to put your EZVIZ sensor system in action in a second, and leave home with peace of mind. Or, give it to the seniors or kids who are home alone, so they can get help if they need it.

#Install it anywhere within your reach

Place the button next to your bed, desk or anywhere you need an extra touch of security. You can set it up as a fixed smart switch, or use it around your home as a remote device³.

#Extremely easy set-up

Use the EZVIZ app to manage the button after being connected to the EZVIZ Home Gateway. Link it with your EZVIZ sensors, choose its mode, and view the activity log – it’s all at your fingertips.

#Long-lasting performance

The T3C can last up to 12 months⁴ on a single battery. When the power runs out, you can replace it in just minutes.

SPECIFICATIONS:

Brand: Ezviz

Model: T3C

Operation Conditions: -10 °C to 55 °C ( 14 °F to 131 °F ), humidity 95% or less (non-condensing)

Dimensions: Φ 40.6 × 12.3mm (Φ 1.6 × 0.5 inch)

Package Size: 92 × 52 × 93 mm (3.6 × 2.0 × 3.7 inch)

Weight: 68 g (2.4 oz) with package

Single Click: < 2 s

Double Click: Interval time < 0.5 s

Long Press: ≥ 2 s

Modes: Arm/Disarm Mode, Emergency Button Mode

Low Battery Reminder: Supports

Anti-Tamper Alarm: Supports

Installation Method: Place anywhere; adhesive back for peel-and-stick installation

Battery Type: Cell battery CR2032

Battery Life: Up to 2 years (Based on the usage of 15 clicks per day)

Protocol: ZigBee 3.0

Communication Distance: < 200 m (Tested in open environment)

Certifications: CE / RoHS / REACH / WEEE / UKCA